• Custom Company Branding: Add your company logos directly onto the mat to create branded walkways and reinforce your business identity on site.
• Two Logos Included: Each branded roll includes two logos as standard.
• Additional Logos Available: Additional logos can be added to accommodate your branding requirements.
• Bright Yellow, High-Visibility Colour: Helps walkways stand out in busy construction, industrial and commercial environments.
• Diamond-Embossed Grip Pattern: The chequer plate surface provides non-directional grip to support secure footing.
• Durable 100% PVC Construction: Designed to withstand regular foot traffic in demanding working environments.
• Suitable for Indoor and Outdoor Use: Can be used in dry or wet areas, offering flexibility across different site conditions.
• Low-Profile Design: Helps provide access for wheelchair users and lightweight wheeled traffic.
• Resistant to Wear, Crushing and Impact: Designed for areas where matting may experience repeated use and physical demands.
• Straightforward Cleaning: Wash with cold water and use a pressure washer or pump where needed to remove accumulated dirt.
• Recyclable and REACH Compliant: The material is described as recyclable and REACH compliant.

Good to Know

Branded SiteMat is supplied in 1m × 10m rolls, with two logos included. Additional logos are available if you need to incorporate more branding.

From the Mats4U Team

Consider where your walkway begins and ends before planning logo placement. Company logos, safety messages and directional markings can help make the matting more useful for the people moving around your site.

Branded SiteMat is designed for busy environments where visible walkways, practical grip and clear site messaging are important. Its bright yellow finish and customisable surface make it suitable for a range of commercial, industrial and construction settings.

• Construction Site Walkways: Mark out pedestrian routes and add company branding to help identify designated walking areas.
• Industrial Premises: Create clearly visible walkways through factories, workshops and other working environments.
• Warehouses and Loading Areas: Use the matting to identify access routes in busy operational spaces, subject to the needs of the site.
• Temporary Site Access Routes: The roll format makes it practical to lay out walkway surfaces across suitable areas where access arrangements may change.
• Commercial and Maintenance Areas: Add branded matting to work areas where a durable, easy-to-clean surface is useful.
• Pedestrian Routes in Wet Areas: Use the mat in suitable wet environments where its embossed surface can provide grip underfoot.
• Accessible Walkways: Its low-profile design can accommodate wheelchair users and lightweight wheeled traffic, provided the surrounding surface and installation are suitable.
• Branded Safety and Directional Routes: Incorporate company logos, safety messages or directional markings to help communicate information along designated walkways.

Good to Know

SiteMat is suitable for indoor and outdoor use, including dry and wet areas. The suitability of any particular installation will depend on the ground surface, site conditions and how the matting is secured.

From the Mats4U Team

Plan the route before laying the matting. Consider pedestrian flow, changes in floor level, edges and transitions so the finished walkway is appropriate for the people and equipment using it.

• Product Name: Branded SiteMat
• Material: 100% PVC
• Colour: Bright yellow
• Roll Size: 1m × 10m
• Surface Pattern: Diamond-embossed chequer plate
• Personalisation: Company logos, safety messages and directional markings printed directly onto the mat
• Included Branding: Two logos per roll
• Additional Branding: Additional logos available
• Slip Resistance: Designed to provide non-directional grip underfoot
• Wear Resistance: Designed for heavy footfall and repeated use
• Water Absorbency: Absorbs water to help manage moisture on the mat surface
• Crush Resistance: Designed to resist crushing under use
• Impact Resistance: Yes
• Wheelchair Accessibility: Low-profile design suitable for wheelchair users
• Lightweight Wheeled Traffic: Suitable
• Suitable Environments: Indoor and outdoor use; dry and wet areas
• Cleaning Method: Cold water; pressure washer or pump can be used to remove dirt
• Temperature Resistance: -10°C to +65°C
• Fire Classification: GB 8624-2012, Class B-s1
• Chemical Compliance: REACH compliant
• End-of-Life Information: Described as recyclable and biodegradable
• Technical Test Information
• Hardness: 85 ± 5 Shore A — DIN ISO 7619-1
• Volume Weight: 1.82 g/cm³ — DIN 53504
• Tensile Strength: Direction 1: 1,690 psi; Direction 2: 1,940 psi — ASTM D412-16
• Elongation at Break: 190% — ASTM D3574-17, Test E
• Puncture Resistance: EN 388:2016+A1:2028, Clause 6.5
• Indentation Resistance: ASTM F970-17

Good to Know

Branded SiteMat is supplied in 1m × 10m rolls. Two logos are included, with additional logos available. Branding is printed directly onto the mat.

From the Mats4U Team

Although SiteMat is designed for grip and heavy footfall, it should not be treated as a substitute for a site-specific risk assessment or other required safety measures. Ensure the mat is suitable for the installation surface and secured appropriately to reduce the risk of movement or raised edges.

Branded SiteMat is designed for straightforward maintenance in busy working environments. Its PVC construction can be cleaned with cold water, while a pressure washer or pump can be used to remove accumulated dirt when necessary.

Recommended Cleaning Steps

1. Remove loose debris: Clear away loose dirt, grit and other material from the mat surface.
2. Wash with cold water: Rinse the surface to remove general dirt and contamination.
3. Use a pressure washer if needed: For more stubborn dirt, use a suitable pressure setting to clean the embossed surface.
4. Allow the mat to drain and dry: Ensure excess water has drained away and the mat is suitable for use before reopening the walkway.

Care Tips

• Inspect the mat regularly for dirt build-up, damage or signs of wear, particularly in high-traffic areas.
• Remove debris from the edges and surrounding floor to help keep the walkway clear.
• Check that the mat remains flat and secure, with no curled edges or movement that could create a trip hazard.
• After cleaning, ensure the surface and surrounding area are suitable for safe access before allowing pedestrians or wheeled traffic to use it.
• Follow any site-specific cleaning and safety procedures relevant to the installation.

Good to Know

SiteMat can be cleaned with cold water, and a pressure washer or pump can be used to remove dirt. Regular cleaning helps maintain the surface, particularly where the mat is exposed to mud, grit and outdoor debris.

From the Mats4U Team

Before cleaning a branded mat, consider the pressure and cleaning method used around the printed logos, safety messages or directional markings. Avoid unnecessarily aggressive treatment that could affect the printed design.

1. What is Branded SiteMat?

Branded SiteMat is a durable PVC walkway mat with a bright yellow finish and a diamond-embossed chequer plate pattern. It can be personalised with company logos, safety messages or directional markings.

2. What size is Branded SiteMat?

The branded version is supplied in rolls measuring 1m wide × 10m long.

3. Can I add my company logo to SiteMat?

Yes. Company logos can be printed directly onto the mat to create a branded walkway surface.

4. How many logos are included?

Two logos are included with each roll. Additional logos can also be requested.

5. Can I add safety messages or directional markings?

Yes. The product can be branded with safety messages and directional markings, as well as company logos. Confirm your intended layout and artwork requirements before ordering.

6. What colour is the mat?

SiteMat has a bright yellow finish designed to make walkway areas more visible.

7. What material is SiteMat made from?

It is made from 100% PVC, providing a durable surface for demanding environments.

8. Can Branded SiteMat be used outdoors?

Yes. It is suitable for indoor and outdoor use, subject to the conditions of the installation.

9. Is SiteMat suitable for wet areas?

Yes. It is specified for use in both wet and dry areas. The surface has a diamond-embossed pattern designed to provide non-directional grip.

10. Does SiteMat provide slip resistance?

The embossed chequer plate pattern is designed to provide grip underfoot. Actual slip performance depends on factors such as contamination, footwear, the underlying surface and installation conditions.

11. Is SiteMat suitable for heavy foot traffic?

Yes. It is designed to resist wear and is intended for areas with heavy footfall, including construction and industrial environments.

12. Can wheelchairs and wheeled equipment travel over SiteMat?

Its low-profile design is specified as suitable for wheelchair users and lightweight wheeled traffic. Check the installation, edges and transitions to ensure the route is appropriate for the intended users and equipment.

13. How do I clean Branded SiteMat?

Wash it with cold water. A pressure washer or pump can be used to remove accumulated dirt where needed.

14. What temperature range can SiteMat withstand?

The supplied technical information gives a temperature resistance range of -10°C to +65°C.

15. What is the fire classification of SiteMat?

The supplied technical information lists its fire classification as GB 8624-2012, Class B-s1.

16. Is SiteMat recyclable?

The product information describes SiteMat as recyclable and biodegradable. These claims should be checked against the current technical documentation before publication.

17. Is SiteMat REACH compliant?

Yes. The supplied product information states that the material is REACH compliant.

18. Can SiteMat be used as a temporary walkway?

The roll format can be practical for creating walkway surfaces in suitable locations. The mat must be installed appropriately, with its edges and position managed to avoid creating trip hazards.

19. Can SiteMat replace other site safety measures?

No. While its bright colour and embossed surface can support walkway visibility and grip, it should be used as part of a wider site-safety approach rather than as a replacement for risk assessments or required safety controls.

20. What should I consider before ordering Branded SiteMat?

Consider the length and width of the route, the intended location, the type of traffic using it and the branding you require. Confirm your artwork and placement requirements before ordering, and check that the mat is suitable for the installation surface.

Good to Know

Branded SiteMat is supplied in 1m × 10m rolls and can include company logos, safety messages or directional markings. Two logos are included per roll, with additional logos available.

From the Mats4U Team

Plan your walkway and branding layout before ordering. Keep important messages clear and easy to recognise, and make sure the finished mat can be installed without creating raised edges or other access hazards.