Heavy Duty Logo Mats

YARN:

Continuous filament PET yarn with 100% post-consumer recycled content

YARN WEIGHT:

935 gr/m²

Mat Thickness: 

9.4mm (Pile 7mm / Backing 1.4mm)

TOTAL WEIGHT:

2935 g/m²

PRIMARY BACKING:

100% recycled PET non-woven

RUBBER BACKING:

100% nitrile rubber for maximum oil resistance, durability, and performance. There is 34% post industrial recycled content in the polymer.

BORDER THICKNESS:

2.5mm

BORDER WIDTH:

2cm

SIZE VARIANCE:

+/- 2%

FLAMMABILITY:

Passes BS 4790 (1987) determination of the flammability of textile floorcoverings: Low radius of effects of ignition.

Heavy-Duty logo Mats can be cleaned in several different ways

They can be commercially laundered (see Laundering Instructions);

Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)

Cleaned with an extractor, or hosed off as necessary to remove heavy soil.

Hang to dry. Mats should always be dry before they are placed back in service.

Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C

Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C

Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C

Rinse, 2 Min. on a high water level with cold temperature

Rinse, 2 Min. on a high water level with cold temperature

Extract on low speed, 1-2 Min.

Shake out with the drum turning, 1 Min.

Extract, on a maximum of 250G, 3-5 Min.

Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C

Cool down, 5 Min.

Additional Recommendations:

For Heavy Soiled Mats, increase temperature up to max. 60°C.

The wash or rinse baths should have a pH between 6 and 9.5; use low pH non-ionic detergents.

Do not overdry mats; Basket-temperature of dryer should not exceed 82 °C.

If mats are not dried, final rinse can be increased to 49 °C. This will reduce moisture retention following extraction.

Lay mats flat following removal from washer; allow mats to cool before rolling