• Tapered edge design: Creates a gradual transition between the existing floor and the raised tiles.
• Helps reduce trip hazards: Designed to provide a safer transition onto and off the tiled surface.
• Three colour options: Available in yellow, black and grey to suit your installation.
• Designed for EasiTile flooring: Complements compatible EasiTile/EasiLok interlocking floor protection tiles.
• Practical dimensions: Each piece measures 500mm long and 75mm wide.
• Tapered thickness: Measures 7mm at the thickest point, tapering to 2mm at the edge.
• Simple installation planning: Individual pieces can be positioned along exposed edges to suit the layout of your tiled area.

Good to know

These ramped edges are designed as an accessory for the floor tiles, not as standalone floor protection. Check the compatibility of your existing tiles before ordering.

From the Mats4U team

Yellow can help make the transition more visually noticeable, while black and grey offer a more understated finish. Choose the colour that best suits your surroundings and visibility requirements.

EasiTile Ramped Floor Protection Edges are designed to fit along the exposed sides of compatible interlocking floor tiles, creating a tapered transition between the tiled surface and the surrounding floor.

Available sizes:

• Length: 500mm
• Width: 75mm
• Thickness: 7mm, tapering to 2mm at the outer edge

Available colours:

• Yellow
• Black
• Grey

Good to know

Each edge covers 500mm of the tiled perimeter. Measure the exposed sides of your installation before ordering to calculate the quantity required.

Top tip

Consider the surrounding floor colour and lighting when choosing your edges. Yellow may provide greater visual contrast in some settings, while black and grey can create a more coordinated finish with the tiles.

From the Mats4U team

For a complete floor protection system, pair these ramped edges with compatible EasiTile Floor Protection Tiles. Check compatibility before ordering if you already have tiles installed.

EasiTile Ramped Floor Protection Edges are a practical addition to interlocking floor protection systems where people, trolleys or other wheeled equipment need to move between the existing floor and the tiled surface.

Suitable applications include:

• Warehouses and distribution centres: Create a tapered transition at exposed tile edges in areas used for moving goods.
• Factories and production areas: Help reduce trip hazards around floor protection installed in busy working environments.
• Garages and workshops: Provide a gradual transition onto tiled areas used for maintenance, storage or equipment.
• Exhibition halls and event spaces: Create a more finished perimeter around temporary or permanent floor protection installations.
• Schools and leisure facilities: Help improve access to suitable tiled areas where foot traffic is frequent.
• Commercial and industrial workspaces: Finish exposed edges around protective flooring in areas where people regularly enter and leave the tiled section.

Good to know

Ramped edges are intended for exposed sides of compatible interlocking tiles. Measure the perimeter carefully and consider where people and wheeled equipment will enter or leave the tiled area.

Top tip

Plan the position of the ramped edges before laying your tiles. This helps you calculate the number of pieces required and ensures the accessible sides are covered where needed.

From the Mats4U team

For the best fit, choose compatible EasiTile Floor Protection Tiles and check the layout of your installation before ordering. If you're unsure whether these edges will suit your existing flooring, contact Mats4U for advice.

EasiTile Ramped Floor Protection Edges are designed to finish the exposed sides of compatible EasiTile interlocking floor protection tiles. Planning their position before installation helps create a neat perimeter and a gradual transition between the tiled area and the surrounding floor.

Before You Start

• Measure the perimeter: Identify the exposed sides where ramped edges are required.
• Calculate the quantity: Each edge is 500mm long, so measure the total length to be covered and allow for the layout of the individual pieces.
• Check compatibility: Make sure the edges are suitable for your existing EasiTile floor protection tiles.
• Prepare the area: Ensure the surrounding floor is clean and free from loose debris before fitting.

Planning Your Layout

• Position the edges: Plan where the ramped edges will meet the exposed sides of the tiled area.
• Check the alignment: Ensure the edges sit neatly alongside the tiles to create a consistent transition.
• Review access points: Consider where people, trolleys and other wheeled equipment will enter and leave the tiled surface.
• Check the finished perimeter: Before using the area, inspect the edges and adjoining floor to identify any gaps, movement or uneven transitions that may need attention.

Good to know

Each ramped edge measures 500mm long, 75mm wide and tapers from 7mm to 2mm thick. The number of pieces required will depend on the length and layout of the exposed perimeter.

From the Mats4U team

If you're adding edges to an existing tiled floor, check compatibility and how the edges are intended to connect before ordering. Contact Mats4U if you need help choosing the right accessories for your installation.

Keeping your EasiTile Ramped Floor Protection Edges clean helps maintain a tidy appearance around your floor protection installation. Regularly removing dust and loose debris also helps keep the transition area clear for everyday foot traffic and wheeled equipment.

For routine maintenance:

• Remove loose dirt: Sweep or vacuum around the edges to remove dust and debris.
• Wipe the surface: Use a damp cloth or mop to remove everyday dirt and marks.
• Check the edges: During routine cleaning, look for movement, gaps or visible damage that could affect the transition between the tiles and the surrounding floor.

Good to know

Avoid assuming that every cleaning chemical is suitable for the edges. Check the cleaning product's suitability for the material before applying it.

Top tip

Pay particular attention to the junction between the ramped edges and the surrounding floor, where dirt and debris can accumulate.

From the Mats4U team

Regular visual checks and simple cleaning can help keep your floor protection installation looking neat. If an edge becomes loose or damaged, address the issue before continuing to use the affected area.

What are EasiTile Ramped Floor Protection Edges used for?

EasiTile Ramped Floor Protection Edges are designed to create a tapered transition between compatible interlocking floor tiles and the surrounding floor. They help reduce trip hazards and provide a more accessible edge for people and wheeled equipment.

What size are the EasiTile ramped edges?

Each edge measures 500mm long and 75mm wide. The thickness tapers from 7mm at the thickest point to 2mm at the outer edge.

What colours are available?

The ramped edges are available in yellow, black and grey. This gives you a choice of finishes to suit your flooring and surrounding environment.

Are the ramped edges supplied with the floor tiles?

No. The ramped edges are separate accessories and need to be ordered separately from the floor protection tiles.

You can find the compatible EasiTile Floor Protection Tiles here.

How many ramped edges do I need?

The quantity depends on the length of the exposed sides of your tiled area. Each piece is 500mm long, so measure the edges where you want a ramped transition and calculate the number of pieces required.

Can I use these edges with existing EasiTile flooring?

They are designed for compatible EasiTile floor protection tiles. If you already have an installation, check the tile profile and compatibility before ordering. Contact Mats4U if you need help confirming suitability.

Are EasiTile ramped edges easy to clean?

Routine maintenance involves removing loose dirt and wiping the surface with a damp cloth or mop. Check the suitability of any cleaning chemicals before use.

Are the ramped edges suitable for heavy wheeled equipment?

The edges are designed to provide a tapered transition onto the tiled surface. However, specific load limits and suitability for particular equipment have not been confirmed for the edges themselves. If you plan to use forklifts, pallet trucks or other heavy equipment, contact Mats4U to discuss your application before ordering.

Do the ramped edges prevent trips completely?

No floor edge can guarantee that trips will be prevented. These ramped edges are designed to help reduce trip hazards by creating a gradual transition between the tiled surface and the surrounding floor. Correct positioning and a suitable installation remain important.