Most front doors are easy to mat. Wide entrances are different: double doors, shopfronts, school and office lobbies, and large recessed matwells can be wider than a single piece of coir. At that point the questions change. How wide does coir matting come? Can you join coir matting? And will the door still open once it is down?
This guide explains the widths Mats4U coir is listed in, how to plan coverage for a wide entrance, when a join may be needed, and how to check door clearance and thresholds before you order. You can see the full range in our coir mats collection. Still choosing a fibre? See coir vs jute door mats.
Contents
- Quick answer: joining coir matting
- How wide does Mats4U coir come?
- Planning a wide entrance
- When coir pieces need joining
- Door clearance and thresholds
- Wide matwells and accessible entrances
- FAQs
Quick Answer: Can You Join Coir Matting?
Often you will not need to. Mats4U coir is listed in widths up to 200cm, with custom lengths up to 1200cm, so many wide entrances can be covered with one piece, especially if the length of the mat runs across the doorway. Where both the width and the depth of the area are over 200cm, the area has to be covered with more than one piece, and the pieces need to be joined or butted together.
[WERNER TO CONFIRM: how Mats4U joins coir widths, e.g. seam method, and whether joined pieces are supplied pre-joined or as separate cut pieces]
Before ordering for a wide entrance, measure it and talk to us. We can tell you whether a single piece will do the job.
How Wide Does Mats4U Coir Come?
These are the widths and lengths listed on our live product pages:
| Product | Thickness | Width | Length |
|---|---|---|---|
| Supercoir roll matting 17mm (also 14mm, 23mm, 30mm) | 14, 17, 23 or 30mm | 100cm or 200cm | Set lengths from 60cm to 300cm, or 1200cm |
| 17mm Heavy-Duty Coir Matting – Custom Cut to Size | 17mm | Custom, up to 200cm | Custom, up to 1200cm |
| Custom Size Heavy Duty Coir Coconut Roll Matting | 14, 23 or 30mm | Custom, up to 200cm | Custom, up to 1200cm |
| Coir logo mat | 17mm | Made to measure, up to 2m | Up to 20m |
The Supercoir 17mm listing gives a maximum roll width of 200cm, and the custom-cut 17mm page says that for larger entrance projects you should contact our team to discuss options.
Planning Coir for a Wide Entrance
Measure both directions
Measure the width of the opening (side to side as you face the door) and the depth of the area people walk across (from the door inwards). For a matwell, measure the inside of the recess, not the old mat, and measure its depth as well. Older mats can shrink, wear at the edges or may never have been the right size. For standard single and double doors, see our coir door mat size guide.
Turn the mat if the entrance is wide but shallow
The 200cm limit applies to one direction of the mat. If your entrance is, say, 300cm wide but only 150cm deep, that area fits within one 200cm-wide piece with the length running across the doorway. The 17mm Heavy-Duty Coir Matting – Custom Cut to Size is ordered by width and length, so give us both measurements and tell us which way people walk.
[WERNER TO CONFIRM: OK to advise turning the mat so its length runs across a wide doorway (any fibre-direction or appearance issue?)]
Cover the walking line
A mat that covers the main walking route will generally remove more dirt than one that only just fits the door. On a double door or a wide lobby, think about where people actually walk, including both leaves of a double door, rather than only the frame width. For long, narrow areas such as halls and corridors, see coir hallway runners.
When Coir Pieces Need Joining
If the area is more than 200cm in both directions, for example a large lobby matwell, it cannot be covered with a single piece of coir, so two or more pieces have to meet. Points to talk through with us before you order:
- Where the join falls. Tell us where the main walking line is and where any doors swing, so the layout can take them into account.
- Same thickness. All pieces should be the same thickness so they sit level with each other and with the floor.
- Natural variation. Coir is a natural fibre, so slight differences in colour and texture between pieces are normal.
- Matwell fit. In a recess, the pieces together need to fill the well neatly without gaps at the edges.
All our coir is PVC-backed; see PVC-backed vs unbacked coir matting for what the backing does.
[WERNER TO CONFIRM: the joining method Mats4U uses or recommends for coir, and any limits on where a seam can go]
For fitting a single piece into a recess, see installing coir matting into a well or recess.
Door Clearance and Thresholds
Wide entrances often have double or automatic doors, so check clearance before choosing a thickness.
- Thickness is the finished height. The stated depth (14, 17, 23 or 30mm) includes the backing, so that is the height the door has to clear on a loose-laid mat.
- Check every door leaf. Open each door fully over the area the mat will cover and measure the gap under the door at its lowest point. Doors that swing inwards over the mat need the most care.
- Choose a lower profile if space is tight. 14mm is our lowest-profile coir; 23mm and 30mm need more clearance.
- Mind the threshold. A loose-laid mat should sit flat against the threshold strip or door bar without riding up onto it or leaving a lip people can catch a foot on.
- In a matwell, aim for flush. The top of the mat should sit as close as possible to the surrounding floor without sitting proud.
Our Supercoir 17mm vs 23mm comparison helps with choosing a thickness. For general advice on keeping entrances safe, see the HSE's guidance on preventing slips and trips at work.
Wide Matwells, Covered Entrances and Accessible Routes
Coir belongs indoors or in a covered entrance, out of direct rain. A wide shopfront or lobby that is open to the weather needs a mat made for outdoor use outside, with coir inside the door. See can coir mats go outdoors? for options.
Many wide entrances are also step-free accessible entrances. Approved Document M says floor surfaces next to the threshold of an accessible entrance should not impede wheelchairs, and gives coir matting as an example to avoid (GOV.UK: Approved Document M). We do not suggest coir on wheelchair routes. See which mats are wheelchair friendly for lower-profile options.
Weighing up whether coir is right for a busy, wide entrance at all? Our coir matting pros and cons guide covers the trade-offs.
Frequently Asked Questions
Can you join coir matting?
Yes, coir can be covered in more than one piece where an area is too large for a single piece. Mats4U coir is listed up to 200cm wide, so a join is only needed where the area is over 200cm in both directions. Contact us with your measurements and we will advise on the layout.
[WERNER TO CONFIRM: joining method to state in this answer]
How wide does coir matting come?
Mats4U Supercoir roll matting is listed in 100cm and 200cm widths, and our custom-cut coir is available up to 200cm wide and up to 1200cm long.
What if my entrance is wider than 200cm?
If the area is less than 200cm deep, it can usually be covered in one piece with the length running across the doorway. If it is over 200cm in both directions, more than one piece is needed. Call us to discuss the layout.
Will a coir mat stop my door opening?
It can if the mat is too thick. Measure the gap under each door leaf where the mat will sit, remember that the stated thickness includes the backing, and choose a lower-profile coir such as 14mm if space is tight.
Can coir go in a wide matwell?
Yes. Measure the inside length, width and depth of the well and choose a thickness that sits level with the surrounding floor. For wells over 200cm in both directions, ask us about covering the area in more than one piece.
Is coir suitable for a wide accessible entrance?
We do not suggest coir on wheelchair routes or at step-free accessible entrances, as its pile can make wheels harder to push. Ask us about lower-profile alternatives.
Get Advice on a Wide Entrance
Browse our coir mats, or measure your entrance (width, depth and, for a matwell, recess depth) and call 0121 313 6748 or email sales@mats4u.co.uk for advice.
See recent installs and new products from Mats4U on Instagram, Facebook and LinkedIn.
